Philips Conference Display Guide

Philips Conference Display

The conference display is designed to autoplay a Yodeck Signage playlist when turned on. After turning on the screen will initiate and menus will not be accessible for a short time. A ‘waiting’ message should display. When this has disappeared the Yodeck playlist should start and main menu can be access by either pressing the home button or pressing ok on the remote.

The display also has a USB drive loaded with content as a backup.

If any additional content is needed on the day there are two options to facilitate this:

Manually update the media files on the USB drive and play them through the app menu.
Make sure the white hotspot box on plugged in to the back of the TV is turned on. This can be done by pressing the middle button.

Unfortunately the automatic screensaver playlist is not easily accessible but will remain as an emergency fallback option.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

To update files on the USB

Take the small USB drive out of the rear of the TV and plug it in to your laptop
Open the USB drive up, labelled ‘CONFERENCE’
Drag or copy and paste your new files in to the ‘ALL CONFERENCE VIDEOS’
Safely remove the USB Drive from your device and plug back in to the TV

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

To play files from USB

Press the home button to get to the display home page
Go to ‘TV Channels’
Go right to ‘Sources’, press ok on ‘USB’
Highlight ‘Conference’ and press right to navigate through the following folders
1. CONFERENCE > Folders > ALL CONFERENCE VIDEOS
Press the red button to play all photos and videos within the folder
The playlist should repeat but if this does not happen, please make sure the repeat button is pressed bottom right

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

To use Yodeck on the display

Press the home button to get to the display home page
Go to ‘Apps’
Go right and select Yodeck
The app should work offline – if either has lost it’s content please try the other app.
If Yodeck has lost it's content then the TV will need to be connected to the Wi-Fi/internet

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

To connect the display to Wi-Fi

(please note that the menu labels have a tendency to change after firmware updates – you may see different wording but the instructions should always be roughly the same)

Press the following combination to access the professional menu
1. Mute, Left, Right, Up, Down, Ok

Go To ‘Wireless and Networks’
Go across right to ‘Wired or Wi-Fi’
Press ok on ‘Connect to Network;
Select ‘Wireless’ then pick a network and enter the password
You may get an error message stating that the network cannot be verified. This is normal – simply press ok to continue.
When finished press home or the back button to exit the professional menu and return to the display home screen